Logitech BCC950 Web Camera Instructions

HOW TO INSTRUCTIONS FOR OPERATION OF THE LOGITECH BCC950 CONFERENCE WEB CAMERA

1. There are two (2) USB cables present to plug into the laptop computer.  One of the cables is to power and charge the web camera.  The second cable is to allow the camera to be the primary camera for any virtual meetings
2. Locate the Logitech remote control.  The remote control has the following buttons located on the front of the remote control:

1. Audio conference telephone answer
2. Audio conference telephone disconnect
3. Camera zoom-in
4. Camera zoom-out
5. Center section for panning and/or tilting the camera
6. Volume decrease
7. Volume increase
8. Muting the camera microphone

3. The camera itself has the same features listed above on the unit itself
4. When using Zoom or any other virtual meeting software program, go to the audio settings.  Locate the “Test Speaker” tab.  On the drop-down menu, select “Logitech BCC950.”  Locate the “Test Microphone” tab.  On the drop-down menu, select “Logitech BCC950.” Press the tab buttons ONCE to test the audio for the meeting
5. When using Zoom, etc., locate the “Video Settings.” In the video drop-down menu, select ‘Logitech BCC950,” uncheck ‘Mirror My Video,” check “HD,” “Adjust/Enhance the Appearance,” and “Adjust for Low Light